Sheet Metal Parts Checking Fixture

Product parameters

Product size:117*52*48mm

Detailed introduction

TTM19102 checking fixture has high measurement accuracy, no fear of deformation, low maintenance cost and good convenience. Key product characteristic inspection, characteristic line inspection, function hole inspection, area detection which is prone to deformation in assembly process, for automobile assembly and production function matching inspection. In the production process of automotive parts, on-line inspection of automotive parts is realized, which ensures the rapid judgment of the quality status of automotive parts in production, ensures the safety and processing speed of automotive assembly, and improves the quality of automotive parts.

IMG_20190725_094750.jpg

1564466413(1).jpg

operation sequence

1.Visual  inspection to check part sharp edges ,cracks and burrs.

2.Using J1/XY1/Y2 AND J2 GO NOGO pin to check the size of holes.

3.Open the clamp,load the part on the body.

4.Adjusting the part keep it well contact nets and lacat it with X/Y1/Z1 and Y2/Z2.

5.Close clamp Z1,Z2,Z3.

6.using the J1-J2pins to check the hole position.

7.using the feeler:1 GOS?4.75NOGO S?5.25;2 GOS?4NOGO S?6, to check surface of the part.

8. Visually detect the edge of the material, it is qualified within +/-1.5 lines, and vice versa.

9.Recording results on the inspection sheet.

10.Unclamping and removing part.

Scan QRcode Share to WeChat

Online consultation
contact number

0769-82208118

在线看不卡日本AV